This 'Bu came from the factory with a V6 engine and a small radiator to match. While I had the front end apart, I bought a new, replacement 3 core copper radiator for V8 applications.
I also needed a fan shroud for the V8. I found one in a junk yard with cracks on most bolt holes. Some washers made it fit though. That is, until I left a drop light on it long enough to warp a chunk of the top edge.
I also got a radiator core support out of a used vehicle. Lots of bolts to get it loose, but the replacement one looked new compared to the rusted out junker that came with the car. After some wire wheel work and some paint, I did look new.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment